Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

In the sketch, the height h is equivalent to 150 kPa and the barometer reading is 100 kPa. What is pressure inside the tank that is attached to the manometer?

Correct Answer: 250 kPa
Pressure inside the tank = atmospheric pressure + pressure due to liquid height h.

A student wants to find the absolute pressure of water at a point below the surface of water. He has a barometer and a manometer pressure gauge. The barometer reads 1.3152 bar where as the manometer pressure gauge reads 0.3152 bar. What is the absolute pressure? (Assume that pressure at one end of the manometer is atmospheric.)

A mercury (specific gravity = 13.6) manometer connected across an orificemeter fitted in a pipe shows a manometer reading of 2 cms. If the manometer liquid is changed to carbon tetrachloride (specific gravity = 1.6), then for the same flow rate of water the new manometer reading will be __________ cms.

A tank has a leak which would empty the completely filled tank in 10 hours. If the tank is full of water and a tap is opened which admits 4 litres of water per minutes in the tank, the leak takes 15 hours to empty the tank. how many litres does the tank hold?

A tank has a leak which would empty the completely filled tank in 10 hours. If the tank is full of water and a tap is opened which admits 4 litres of water per minute in the tank , the leak takes 15 hours to empty the tank. How many litres of water does the tank hold?

Tanks A and B are each in the shape of a right circular cylinder. The interior of tank A has a height of 10 meters and a circumference of 8 meters, and the interior of tank B has a height of 8 meters and a circumference of 10 meters. The capacity of tank A is what percent of the capacity of tank B ?

In a U-tube manometer, one end is open to the atmosphere, the other end attached to a pressurized gas of gauge pressure 40 kPa. The height of the fluid column in the atmospheric side is 60 cm, and that on the gas side is 30 cm. The manometic fluid used is: (Take g = 9.8 m/s2).

Two tanks are filled to capacity with automobile fuel. The first tank holds 600 gallons more than the second tank. If 100 gallons were to be pumped from each tank, the first tank would then contain 3 times as much fuel as the second tank. What is the total number of gallons of fuel in the two full tanks?

Pressure difference between two points in vessels, pipelines or in two different pipelines can be measured by a differential manometer. The pressure difference measured as the mm of water coloumn in case of mercury-water, differential manometer is equal to (where, H = difference in height of mercury column in mm).

A closed rectangular tank contains a certain amount of water. When the tank is placed on its 3 ft by 4 ft side, the height of the water in the tank is 5 ft . Wen the tank is placed on another side of dimensions 4 ft by 5 ft , what is the height, in feet,

For water at 300°C, it has a vapour pressure 8592.7 kPa and fugacity 6738.9 kPa Under these conditions, one mole of water in liquid phase has a volume of 25.28 cm3 and that in vapour phase in 391.1 cm3. Fugacity of water (in kPa) at 9000 kPa will be