Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

For water at 300°C, it has a vapour pressure 8592.7 kPa and fugacity 6738.9 kPa Under these conditions, one mole of water in liquid phase has a volume of 25.28 cm<sup>3</sup> and that in vapour phase in 391.1 cm<sup>3</sup>. Fugacity of water (in kPa) at 9000 kPa will be

Correct Answer: 6753.5
We know $$\ln \left( {\frac{f}{{{f^{sat}}}}} \right) = \frac{v}{{RT}}\left( {p - {p^{sat}}} \right)$$      substituting the suitable values we will get $$f=6753.5$$

At 60° C, vapour pressure of methanol and water are 84.562 kPa and 19.953 kPa respectively. An aqueous solution of methanol at 60° C exerts a pressure of 39.223 kPa; the liquid phase and vapour phase mole fractions of methanol are 0.1686 and 0.5714 respectively. Activity co-efficient of methanol is

Two feeds, 10 mole with 5 J/mole and 20 mole with 15 J/mole, product contains two streams, 5 mole with 10 J/mole and P with 25 J/mole, what is the value of P?

Two feeds, 5 mole with 25 J/mole and F with 5 J/mole, product contains two streams, 5 mole with 10 J/mole and 10 mole with 15 J/mole, what is the value of F?

An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively.The humidity of air sample expressed as kg of water vapour/kg of dry air is

Pure aniline is evaporating through a stagnant air film of 1 mm thickness at 300 K and a total pressure of 100 KPa. The vapor pressure of aniline at 300 K is 0.1 KPa. The total molar concentration under these conditions is 40.1 mole/m3. The diffusivity of aniline in air is 0.74 × 10-5 m2/s.The numerical value of mass transfer co-efficient is 7.4 × 10-3. The rate of evaporation of aniline is 2.97 × 10-4. Its units are

Pure aniline is evaporating through a stagnant air film of 1 mm thickness at 300 K and a total pressure of 100 KPa. The vapor pressure of aniline at 300 K is 0.1 KPa. The total molar concentration under these conditions is 40.1 mole/m3. The diffusivity of aniline in air is 0.74 × 10-5 m2/s. The numerical value of mass transfer co-efficient is 7.4 × 10-3. Its units are

At 100°C, water and methylcyclohexane both have vapour pressures of 1 atm. Also at 100°C, the latent heats of vaporisation of these compounds are 40.63 kJ/mole for water and 31.55 kJ/mole for methylcyclohexane. The vapour pressure of water at 150°C is 4.69 atm. At 150°C, the vapour pressure of methylcyclohexane would be expected to be

A car tyre of volume 0.057 m3 is inflated to 300 kPa at 300 K. After the car is driven for 10 hours, the pressure in the tyre increases to 330 kPa. Assume air is an ideal gas and Cv for air is 21 J/mole.K. The change in the internal energy of air in the tyre in J/mole is

Consider a given volume of liquid at a temperature T below Tm with a free energy G’. If some of the atoms of the liquid cluster together to form a small sphere of solid, the free energy of the system will change to G, given by________ (Assume V1 volume of the solid sphere, V2 volume of liquid, A is the solid/liquid interfacial area, γ solid/liquid interface free energy, G1 and G2 are the free energies per unit volume of solid and liquid respectively).

A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is Φi yi P = Yi xi fi° where, Φ is a vapor fugacity component, Yi is the liquid activity co-efficient and fi° is the fugacity of the pure component i. the Ki value (Yi = Ki xi) is therefore, in general a function of