Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

A single phase full bridge inverter has a dc voltage source Vs = 230 V. Find the rms value of the fundamental component of output voltage.

Correct Answer: 207 V
The fundamental component of voltage = (4Vs/π) sinωt. Peak value Vm = 4Vs/π Rms value = 4Vs/π√2.

A single phase full bridge inverter is fed from a dc source such that the fundamental component of output voltage = 230 V. Find the rms value of SCR and diode current respectively, for a R load of 2 Ω.

A single-phase bridge inverter, fed from a 230 V dc is connected to the load R = 10 Ω and L = 0.03 H. Determine the fundamental component of rms output current. Fundamental output frequency of the square wave output = 50 Hz.

A single phase full bridge inverter has load R = 2 Ω, and dc voltage source Vs = 230 V. Find the rms value of the fundamental load current.

A single phase full bridge inverter has RLC load with R = 4 Ω, L = 35 mH and C = 155 μF. The dc input voltage is 230 V and the output frequency is 50 Hz. Find the rms value of the fundamental load current.

A single-phase bridge inverter, fed from a 230 V dc is connected to the load R = 10 Ω and L = 0.03 H. The output is a quasi-square wave with an on period of 0.5 of a cycle. Determine the fundamental component of rms output voltage.

A single phase half bridge inverter has a dc voltage source Vs/2 = 115 V. Find the rms value of the fundamental component of output voltage.

A single phase full bridge inverter circuit, has load R = 2 Ω and dc source Vs = 230 V. Find the value of power delivered to the load in watts only due to the fundamental component of the load current.

A certain full bridge type inverter circuit has its rms value of fundamental load current component given by W. The fundamental frequency component of the load current would be given by

A single phase full bridge inverter has RLC load with R = 4 Ω, L = 35 mH and C = 155 μF. The dc input voltage is 230 V and the output frequency is 50 Hz. Find the angle by which the third harmonic current will lead/lag the third harmonic output voltage.

A single-phase full converter bridge, is connected to a RLE load. The source has a rms voltage of 230 V and the average load current is 10 A. Find the firing angle for which the power flows from AC source to the DC load. Consider E = 120 V, R = 0.4 Ω.