Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

Discrete transistors T1 and T2 having maximum collector current rating of 0.75A are connected in parallel as shown in the figure. This combination is treated as a single transistor to carry a single current of 1A, when biased with a self bias circuit. When the circuit is switched ON, T1 had draws 0.55A and T2 draws 0.45A. If the supply is kept ON continuously, it is very likely that_________

Correct Answer: only T1 gets damaged
The T1 transistor is having more power dissipation as it is drawing 0.55A. When power dissipation increases, the temperature increases and this leads to the ultimate further increase in the current drawn by T1. The current drawn by T2 will be reduced as the sum of currents drawn by T1 and T2 should be constant.

Consider an NMOS transistor having kn= 2 mA/V2. Let the transistor be biased at VOV = 1V. For operation in saturation, what dc bias current ID results? If a +0.1-V signal is superimposed on VGS, find the corresponding increment in collector current by evaluating the total collector current ID and subtracting the dc bias current ID.

Regarding bias and variance, which of the following statements are true? (Here 'high' and 'low' are relative to the ideal model.
i. Models which overfit are more likely to have high bias
ii. Models which overfit are more likely to have low bias
iii. Models which overfit are more likely to have high variance
iv. Models which overfit are more likely to have low variance

Regarding bias and variance, which of the following statements are true? (Here 'high' and 'low' are relative to the ideal model. (i) Models which overfit are more likely to have high bias (ii) Models which overfit are more likely to have low bias (iii) Models which overfit are more likely to have high variance (iv) Models which overfit are more likely to have low variance

The total thermal resistance of a power transistor and heat sink is 20°C/W. The ambient temperature is 25°C and (TJ)MAX=200°C. If VCE=4V, find the maximum collector current that the transistor can carry without destruction. What will be the allowed value of collector current if ambient temperature rises to 75°C?

Consider the circuit shown below which reduces the impact of the input bias current. If IB1 = IB2 = Input bias current, then determine the value of R3 so that the output voltage (v0) is not impacted by the input bias current.

Seven people A, B, C, D, E, F and G live on separate floors of a 7-floor building. Ground floor is numbered 1, first floor is numbered. 2 and so on until the topmost floor is numbered 7. Each one of these having a different cars-Cadillac, Ambassador, Fiat, Maruti, Mercedes, Bedford and Fargo but not necessarily in the same order. Only three people live above the floor on which A lives. Only one person lives between A and the one having a car Cadillac. F lives immediately below the one having a car Bedford. The one having a car Bedford lives on an even-numbered floor. Only three people live between the ones having a car Cadillac and Maruti. E lives immediately above C. E is not having a car Maruti. Only two people live between B and the one having a car Fargo. The one having a car Fargo lives below the floor on which B lives. The one having a car Fiat does not live immediately above D or immediately below B. D does not live immediately above or immediately below A. G does not have a car Ambassador. Question : How many people live between the floors on which D and the one having a car Bedford ?

Determine the value of emitter current and collector current of a transistor having α=0.98 and collector to base leakage current ICBO=4µA. The base current is 50µA.

If the power rating of a transistor is 1W and collector current is 100mA, then maximum allowable collector voltage is ___________

For the amplifier circuit in the below figure with Vcc = +10 V, Rc = 1 kΩ and the DC collector bias current equal to Ic. The maximum possible positive output signal swing as determined by the need to keep the transistor in the active region.

For the amplifier circuit in the below figure with Vcc = +10 V, Rc = 1 kΩ and the DC collector bias current equal to Ic. The maximum possible negative output signal swing as determined by the need to keep the transistor in the active region.