Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

A mixture of concentrated nitric acid and concentrated hydrochloric acid in the ratio of . . . . . . . . is called Aqua-Regia.

Correct Answer: 1 : 3

Solution-1 containing 10% hydrochloric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% hydrochloric acid and 30% acetic acid at the rate D, the product formed contains 20% hydrochloric acid and 30% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?

Solution-1 containing 10% nitric acid and 20% acetic acid at the rate F combines with Solution-2 containing 20% nitric acid and 10% acetic acid at the rate D, the product formed contains 30% nitric acid and 20% acetic acid at the rate P, how many independent equations containing F, D, and P are possible?

Aqua regia is an acidic, corrosive and oxidative mixture consisting of . . . . . . . . volume/volumes of concentrated hydrochloric acid and one volume of concentrated nitric acid, often used to dissolve gold and platinum.

Which of the following chemicals are used to treat the instruments made out of polymers? i) Ethylene Oxide ii) Hydrochloric Acid iii) Silver Cyanide iv) Ozone v) Bleach vi) Saline Solution vii) Sulphuric Acid viii) Glutaraldehyde and Formaldehyde ix) Phthalaldehyde x) Hydrogen Peroxide xi) Nitric Acid xii) Peracetic Acid xiii) Silver xiv) Formic Acid xv) Citric Acid

Solution-1 containing 40% nitric acid and 20% carbon dioxide at the rate F combines with Solution-2 containing 30% nitric acid and 40% carbon dioxide at the rate D, the product formed contains 30% nitric acid and 20% carbon dioxide at the rate P, If P = xF what is x?

Solution-1 containing 10% nitric acid flowing at the rate 10 Kg/min combines with Solution-2 containing 40% nitric acid flowing at the rate 5 Kg/min, if their product contains 30% nitric acid, what is the flow rate of product?

A sample of polystyrene is warmed under reflux in concentrated nitric acid and the clear mixture is poured in water to yield a X coloured precipitate. This precipitate is then extracted with ether and then with NaOH solution followed by washing with water in each extraction. The nitro compounds from the combined final aqueous extract and alkaline extract using concentrated HCl and zinc. The final solution after being diazotized and then cooled is poured into excess of alkaline naphthol to give Y coloured solution. What are the colours X and Y?

In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.

In a mixture, water and milk are in the ratio of 3 : 5. In the second mixture, the ratio of water and milk is 9 : 11. If these two mixtures be mixed to form anew mixture in which water and milk are in ratio 5 : 7, then what is the ratio of these two mixtures in the new mixture?

How many liters of a 90% of concentrated acid needs to be mixed with a 75% Solution of concentrated acid to get a 30 liter Solution of 78% concentrated acid?