Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

Which of the following statements about Printed circuit heat exchanger are correct? Statement 1: Printed circuit heat exchanger is an example for direct heat exchanger. Statement 2: It has high heat transfer surface area per unit volume of the exchanger.

Correct Answer: False, True
Printed circuit heat exchanger is an example for indirect heat exchanger. It can be used as alternatives to shell and tube heat exchanger. It has high heat transfer surface area per unit volume of the exchanger. It also reduces the energy requirement. But it is expensive than shell and tube units and the fluid needs to be extremely clean or else blockages can occur due to the fine channels. Therefore the fluids are filtered before the feeding into inlet pipe.

"It is now expected that the variable production cost per unit and the selling price per unit will each increase by 10%, and fixed production cost will rise by 25%. What will be the new break even point?
Selling price - Rs 6 per unit
Variable production cost - Rs 1.20 per unit
Variable selling cost - Rs 0.40 per unit
Fixed production cost - Rs 4 per unit
Fixed selling cost - Rs 0.80 per unit
Budgeted production and sales for the year are 10,000 units."

A finned surface consists of root or base area of 1m2 and fin surface area of 2m2. The average heat transfer coefficient for finned surface is 20W/m2K effectiveness of fins provided is 0.75. If finned surface with surface with root or base temperature of 50°C is transferring heat to fluid of 30°C, then the rate of heat transfer without using fin is _______

A heat exchanger with heat transfer surface area A and overall heat transfer coefficient U handles two fluids of heat capacities Cmax and Cmin. The number of transfer units (NTU) used in the analysis of heat exchanger is specified as

Forced air flows over a convection heat exchanger in a room heater, resulting in a convective heat transfer coefficient 1.136 k W/m2 K. The surface temperature of heat exchanger may be considered constant at 65 degree Celsius, and the air is at 20 degree Celsius. Determine the heat exchanger surface area required for 8.8 k W of heating

In a surface condenser, the water flowing through a series of tubes at the rate of 200 kg/hr is heated from 15 degree Celsius to 75 degree Celsius. The steam condenses on the outside surface of tubes at atmospheric pressure and the overall heat transfer coefficient is estimated at 860 k J/m2 hr degree. Find the number of transfer units of the heat exchanger. At the condensing pressure, stream has saturation temperature 0f 100 degree Celsius and the latent heat of vaporization is 2160 k J/kg. Further, the steam is initially just saturated and the condensate leaves the exchanger without sub-cooling i.e. only latent heat of condensing steam is transferred to water. Take specific heat of water as 4 k J/kg K

A cube is inscribed in a sphere. A right circular cylinder is within the cube touching all the vertical faces. A right circular once is inside the cylinder. Their heights are same and the diameter of the cone is equal to that of the cylinder. Consider the following statements: 1) The surface area of the sphere is √5 Times the curved surface area of the cone. 2) The surface area of the cube is equal to the curved surface area of the cylinder. Which of the above statements is/are correct?

"What is the company's breakeven point:
Selling price - Rs 6 per unit
Variable production cost - Rs 1.20 per unit
Variable selling cost - Rs 0.40 per unit
Fixed production cost - Rs 4 per unit
Fixed selling cost - Rs 0.80 per unit
Budgeted production and sales for the year are 10,000 units."

"How many units must be sold if company wants to achieve a profit of Rs 11,000 for the year?
Selling price - Rs 6 per unit
Variable production cost - Rs 1.20 per unit
Variable selling cost - Rs 0.40 per unit
Fixed production cost - Rs 4 per unit
Fixed selling cost - Rs 0.80 per unit
Budgeted production and sales for the year are 10,000 units."

Plate type heat exchangers have less surface area as compared to a similar Shell and Tube heat exchanger. A Shell and Tube Heat Exchanger of equivalent area weigh six-seven times less than a Plate Type heat exchanger.

In a surface condenser, the water flowing through a series of tubes at the rate of 200 kg/hr is heated from 15 degree Celsius to 75 degree Celsius. The steam condenses on the outside surface of tubes at atmospheric pressure and the overall heat transfer coefficient is estimated at 860 k J/m2 hr degree. Find the effectiveness of the heat exchanger. At the condensing pressure, stream has a saturation temperature 0f 100 degree Celsius and the latent heat of vaporization is 2160 k J/kg. Further, the steam is initially just saturated and the condensate leaves the exchanger without sub-cooling i.e. only latent heat of condensing steam is transferred to the water. Take specific heat of water as 4 k J/kg K