Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

A finned surface consists of root or base area of 1m2 and fin surface area of 2m2. The average heat transfer coefficient for finned surface is 20W/m2K effectiveness of fins provided is 0.75. If finned surface with surface with root or base temperature of 50°C is transferring heat to fluid of 30°C, then the rate of heat transfer without using fin is _______

Correct Answer: 800W
(Qwithout) = hA(Th – Tinfinity) Q = 20×2×(50 – 30) Q = 800W.

Consider the following statements pertaining to heat transfer through fins (i) They must be arranged at right angles to the direction of flow of working fluid (ii) The temperature along the fin is variable and accordingly heat transfer rate varies along the fin elements (iii) Fins are equally effective irrespective whether they are on the hot side or cold side of the fluid (iv) Fins are made of materials that have thermal conductivity higher than that of wall Identify the correct statements

A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube without fin

A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube with fin

An electronic semiconductor device generates 0.16 k J/hr of heat. To keep the surface temperature at the upper safe limit of 75 degree Celsius, it is desired that the heat generated should be dissipated to the surrounding environment which is at 30 degree Celsius. The task is accomplished by attaching aluminum fins, 0.5 square mm and 10 mm to the surface. Work out the number of fins if thermal conductivity of fin material is 690W/m K and the heat transfer coefficient is 45k J/square m hr K. Neglect the heat loss from the tip of the fin

A motor cycle cylinder consists of ten fins, each 150 mm outside diameter and 75 mm inside diameter. The average fin temperature is 500 degree Celsius and the surrounding air is at 20 degree Celsius temperature. Make calculations for the rate of heat dissipation from the cylinder fins by convection when motor cycle is stationary and convective coefficient is 6 W/m2 K

Extended heat transfer surface like fins are used to increase the heat transfer rate. Fin efficiency is defined as the ratio of heat transferred across the fin surface to the theoretical heat transfer across an equal area held at the

Find the heat transfer rate from a hot surface for 6 fins of 10 cm length? The base temperature of the fin is maintained at 200 degree Celsius and the film is exposed to a convection environment at 15 degree Celsius with convective coefficient 25W/square m K. Each fin has cross-sectional area 2.5 square centimeter and is made of a material having thermal conductivity 250W/m K

An air cooled cylindrical wall is to be fitted with triangular fins of 3 cm thickness at base and 12 cm in height. The fins are made from stainless steel with density 8000 kg/m3 and thermal conductivity 17.5 W/m K. The wall temperature is 600 degree Celsius and the fin is exposed to an environment with t a = 30 degree Celsius and h = 20 W/m2 K. What is the temperature distribution along the fin? . b) t = 20 + 250 I 0 . c) t = 30 + 250 I 0 . d) t = 40 + 250 I 0 .

Analysis of heat flow from the finned surface is made with the following assumptions (i) Uniform heat transfer coefficient, h over the entire fin surface (ii) No heat generation within the fin generation (iii) Homogenous material Identify the correct option

“Effectiveness of fin is the ratio of the fin heat dissipation with fin to that of no fin”.