Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

In the Frank-Read dislocation source, if the distance between fixed points is L, then the minimum possible value of dislocation loop radius will be equal to L/2. The shear stress required to achieve this point is ____________

Correct Answer: Gb/L
The shear stress required to achieve this point will be equal to Gb/L. Beyond this point, the required shear stress value will keep on decreasing.

Tresca or maximum-shear stress criteria assumes that yielding occurs when the maximum shear stress reaches a value of the shear stress in the uniaxial tension test. Assume the principal stress being σ1, σ2, σ3 where σ1 is largest, and σ3 is the smallest principal stresses. Find the value of minimum shear stress to cause yielding, given that yield stress in tension is equal to σo?

In the Frank-Read dislocation source, if the distance between fixed points is L, then the minimum possible value of dislocation loop radius will be equal to__________

In the Frank-Read dislocation source, if the distance between fixed points is L, then the minimum possible value of dislocation loop radius will be equal to

Shear stress required to bend a dislocation of radius R and burger vector b is P. What will be shear stress needed to turn a dislocation of radius 2R and burger’s vector 2b to bend the dislocation?

Study the following information and answer the questions. Point A is 8m to the west of Point B. Point C is 4m to the south of Point B. Point D is 4m to the east of Point C. Point F is 6m to the north of Point D. Point E is 8m to the west of Point F. Point G is 2m to the south of Point E. If point G is 4m to the north of Point H, then what is the distance between H and D?

The largest size of immobilised segment of dislocation in a Frank Read (FR) source contained in a polycrystalline material is of the order of grain size. In a metal of 10 μm grain size, the shear stress required to operate such a FR source is 100 MPa. If the grain size in the same metal is reduced to 10 μm, the shear stress required to operate such FR source would be . . . . . . . . MPa.

Study the following information and answer the questions. Point A is 8m to the west of Point B. Point C is 4m to the south of Point B. Point D is 4m to the east of Point C. Point F is 6m to the north of Point D. Point E is 8m to the west of Point F. Point G is 2m to the south of Point E. How far and in which direction is Point G from Point A?

What is the resolved shear stress, when dislocation density in metal is equal to 1012m-2? Given that shear stress needed in the absence of dislocation is 500MPa. Numerical constant is 0.3 and shear modulus is 80GPa, burger vector is 1 nm.

A wall bracket is attached to the wall by means of 2 identical bolts, one at A and one at B. The force of 20kN acts at a distance of 400mm. Bolt A lies at a distance of 50mm from axis of tilt and bolt B 500mm. Allowable shear stress in the bolts is 100N/mm² and tensile is 40N/mm². Find the radius of Mohr circle which can be made from the shear stress and tensile stress acting on bolts.(Consider bolt under max stress and area of bolt is A)

Consider a conducting loop of radius a and total loop resistance R placed in a region with a magnetic field B thereby enclosing a flux $${\phi _0}$$ . The loop is connected to an electronic circuit as shown, the capacitor being initially uncharged.
Electromagnetic Theory mcq question image
If the loop is pulled out of the region of the magnetic field at a constant speed u, the final output voltage Vout is independent of