Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

1 mole of Carbon dioxide enters in a reactor at a rate of 0.25 kg/s and leaves it at the rate of 1 kg/s, what are the number of moles of carbon dioxide leaves the reactor?

Correct Answer: 0.25
Applying reaction equilibrium equation, 1*0.25 = n*1, => n = 0.25.

A Composition of carbon dioxide, oxygen and nitrogen with mole ratio 1:2:5 with 4 moles of oxygen, enters a reactor with a flow rate of 100 kg/s, the ratio of rates of leaving the reactor of the three is 5:2:1, and 5 moles of nitrogen leaves the reactor, what is the total number of moles leaving the reactor?

The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the number of moles, moles of inerts and moles of hydrogen in the recycle stream?

In the carbonation of a soft drink, the total quantity of carbon dioxide required is the equivalent of 3 volumes of gas to one volume of water at 0⁰C and atmospheric pressure. Calculate (i) the mass fraction and (ii) the mole fraction of the CO2 in the drink, ignoring all components other than CO2 and water. Basis 1 m3 of water = 1000 kg Volume of carbon dioxide added = 3 m3 From the gas equation, pV = nRT 1 x 3 = n x 0.08206 x 273 n = 0.134 mole. Molecular weight of carbon dioxide = 44 And so weight of carbon dioxide added = 0.134 x 44 = 5.9 kg

The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the moles of nitrogen entering the reactor and in the recycle stream?

Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m2 and the solvent flow, rate is 400 moles of S/m2.hr. The equilibrium data is represented by Y = 3X2, where Y is in moles of a A/moles of B and X is in moles A/moles of S. The maximum percentage extraction achieved in the unit is

Two feeds, 10 mole with 5 J/mole and 20 mole with 15 J/mole, product contains two streams, 5 mole with 10 J/mole and P with 25 J/mole, what is the value of P?

Two feeds, 5 mole with 25 J/mole and F with 5 J/mole, product contains two streams, 5 mole with 10 J/mole and 10 mole with 15 J/mole, what is the value of F?

Evaporation of n-propyl alcohol into carbon dioxide for the same geometrical arrangement of tube diameter (d) of 38 mm when the carbon dioxide flows at a maximum velocity (ug) of 10 m/s at 300 K and 1 atm. Properties of dilute mixtures of propyl alcohol in carbon dioxide at 300 K and 1 atm are: Molecular weight (M) = 44 gm/mole, density (ρ) = 1.8 kg/m3 , Viscosity (μ) = 1.49×10-5 kg/m.s, diffusivity (DAB) = 7.6×10-6 m2 /s and universal gas constant (R) = 8.314 J/mole.K. Estimate the Reynolds number. Nu = 0.453Re0.568 Pr0.36, where 10 < Re (= ρug d/μ)<106 and 0.7 < Pr < 500

10 moles of oxygen divides and enters two reactors flow rate 45 kg/s and leaves the reactors at the flow rates of 6 kg/s and 9 kg/s, what are number of moles of oxygen that leaves the reactor with 9 kg/s?

The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream. Calculate the moles of ammonia produced.