Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

In a fuel-injection system, the amount of fuel delivered into the air stream going to the engine is controlled by a pump which forces the fuel under pressure.

Correct Answer: True

The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the moles of nitrogen entering the reactor and in the recycle stream?

The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the number of moles, moles of inerts and moles of hydrogen in the recycle stream?

The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream. Calculate the moles of ammonia produced.

In a diesel engine
1. Fuel injection pump is used
2. Fuel injection pump and carburettor is used
3. Fuel injector is used
4. Neither fuel injection pump nor injector is used

Which one of the statement is correct?
1. Petrol engine is a reciprocating engine
2. Petrol engine is high speed engine
3. Petrol engine uses petrol as fuel
4. Petrol engine is internal combustion engine

A solid-oxide fuel cell is fed with carbon monoxide and reacts with air to produce CO2. This reaction will produce 2 electrons which are used to power an electric circuit external to the fuel cell. The reaction equation is shown below: 2CO(g) + O2(g) -> 2CO2(g) ΔHr° = -565.96 kJ/mol This reaction does not occur for other types of fuel cells which use a catalyst, such as polymerelectrolyte membrane or phosphoric-acid fuel cells. The presence of carbon monoxide on the anode side of these types of fuel cells will cause catalyst poisoning, reducing the efficiency and voltage of the fuel cell. Determine the rate of enthalpy change for a carbon dioxide production rate of 208 mol/hr. The extent of the reaction occurring in the fuel cell can be obtained by the following equation: where:

The system of forces acting on the aircraft are propulsive forces, aerodynamic forces, gravitational forces and these result in inertial forces.

If the gear ratio for fuel pump is thrice that of the oxidizer pump, the shaft speed of fuel pump is ____________ the oxidizer pump.

In MPFI-Air Induction System, the air cleaner, the air flow meter, the throttle body and the air valve supply a proper amount of air to the air intake chamber and intake manifold.

What is minimum amount of air required per m3 of gaseous fuel for complete combustion? m3/m3 of fuel b) 1/100 m3/m3 of fuel c) 1/21 m3/m3 of fuel d) 1/100 m3/m3 of fuel