Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

The ratio of existing moles of vapor per mole of vapor free gas to the moles of vapor that would be present per mole of vapor free gas, if the mixture were saturated at the existing temperature & pressure, is termed as the

Correct Answer: Percentage saturation

Consider the 5 × 5 matrix \[{\text{A}} = \left[ {\begin{array}{*{20}{c}} 1&2&3&4&5 \\ 5&1&2&3&4 \\ 4&5&1&2&3 \\ 3&4&5&1&2 \\ 2&3&4&5&1 \end{array}} \right

Eigen values of the matrix \[\left[ {\begin{array}{*{20}{c}} 0&1&0&0 \\ 1&0&0&0 \\ 0&0&0&{ - 2i} \\ 0&0&{2i}&0 \end{array}} \right

Let A be an m × n matrix and Ban n × m matrix. It is given that determinant ($$I$$m + AB) = determinant ($$I$$n + BA), where $$I$$k is the k × k identity matrix. Using the above property, the determinant of the matrix given below is
\[\left[ {\begin{array}{*{20}{c}} 2&1&1&1 \\ 1&2&1&1 \\ 1&1&2&1 \\ 1&1&1&2 \end{array}} \right

The highest pressure gas of a mixture has partial pressure p, the partial pressure of other gases decreases by factor of 2n-1, the partial pressure of second gases decreases by a factor of 2, partial pressure of third gas increases by 4, and so on, if the total pressure of gas mixture is 31p/16, how many gases are present in the mixture?

The fresh feed to an ammonia synthesis reactor contains nitrogen, hydrogen and 2.0 mole per cent inerts. The molar ratio of H2:N2 is 3:1. The product stream consists of pure ammonia. Since conversion in the reactor is only 15%, a recycle stream is used and in order to avoid build-up of inerts, a purge stream is withdrawn. The rate of purge stream is adjusted to keep inert concentration in the recycle stream at 8 mole per cent. For a fresh feed rate of 100 moles/hr. Note that recycle stream contains only nitrogen, hydrogen and inerts. The N2:H2 ratio of 1:3 is maintained in every process stream, and calculate the number of moles, moles of inerts and moles of hydrogen in the recycle stream?

Two feeds, 10 mole with 5 J/mole and 20 mole with 15 J/mole, product contains two streams, 5 mole with 10 J/mole and P with 25 J/mole, what is the value of P?

Two feeds, 5 mole with 25 J/mole and F with 5 J/mole, product contains two streams, 5 mole with 10 J/mole and 10 mole with 15 J/mole, what is the value of F?

Which of the following statements about partial pressure are correct? Statement 1: The partial pressure of each gas in a mixture is not proportional to its mole fraction.. Statement 2: The partial pressure of each gas is the product of the total pressure and the mole fraction of that gas.

A gas mixture contains 6 moles of H2 and 2 moles of N2. If the total pressure of the gaseous mixture is 4 kgf/cm2; then the partial pressure of N2 in the mixture will be __________ kgf/cm2.

Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m2 and the solvent flow, rate is 400 moles of S/m2.hr. The equilibrium data is represented by Y = 3X2, where Y is in moles of a A/moles of B and X is in moles A/moles of S. The maximum percentage extraction achieved in the unit is