Bissoy
Login
Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App
In a certain parallel resonant band-pass filter, the resonant frequency is 14 kHz. If the bandwidth is 4 kHz, the lower frequency is
A
7 kHz
B
10 kHz
C
12 kHz
D
Cannot be determined
Correct Answer:
12 kHz
In a certain parallel resonant band-pass filter, the resonant frequency is 14 kHz. If the bandwidth is 4 kHz, the lower frequency
A
Is 7 kHz
B
Is 10 kHz
C
Is 12 kHz
D
Cannot be determined
A signal containing only two frequency components (3 kHz and 6 kHz) is sampled at the rate of 8 kHz, and then passed through a low pass filter with a cut-off frequency of 8 kHz. The filter output
A
Is an undistorted version of the original signal
B
Contains only the 3 kHz component
C
Contains the 3 kHz component and a spurious component of 2 kHz
D
Contains both the components of the original signal and two spurious components of 2 kHz and 5 kHz
A resonant circuit has a lower critical frequency of 7 kHz and an upper critical frequency of 13 kHz. The bandwidth of the circuit is
A
6 kHz
B
13 kHz
C
20 kHz
D
4 kHz
Butterworth lowpass filter has a parameter, filter order, determining its functionality as very sharp or very smooth filter function or an intermediate filter function. If the parameter value is of lower order, the filter approaches to which of the following filter(s)?
A
Ideal lowpass filter
B
Gaussian lowpass filter
C
All of the mentioned
D
None of the mentioned
A rotary drum filter with 30% submergence is used to filter concentrated aqueous slurry of calcium carbonate containing 15lb of solids per cubic foot of water. The pressure–drop is 2011Hg. If the filter cake contains 50% mixture (wet basis), calculate the filter area required to filter 10 gal/min of slurry. The filter cycle time is 5 min. The specific cake resistance depends on the pressure–drop as: α (ft/lb) = α (Δp)0.26, where α = 2.90×1010 Viscosity of the filtrate = 6.72×10-4 lb/ft-s. Density of calcium carbonate = 168.8 lb/ft3. Neglect filter medium resistance.
A
≅ 88 ft2
B
= α (Δp)0.26, where α = 2.90×1010 Viscosity of the filtrate = 6.72×10-4 lb/ft-s. Density of calcium carbonate = 168.8 lb/ft3. Neglect filter medium resistance. a) ≅ 88 ft2 [ ≅ 86 ft2
C
≅ 82 ft2
D
≅ 90 ft2
What is the bandwidth of the signal if the upper sideband frequency and the lower sideband frequency are 7350 KHz and 7210 KHz respectively?
A
14,560KHz
B
140KHz
C
1500KHz
D
800KHz
A certain series resonant circuit has a bandwidth of 2 kHz. If the existing coil is replaced with one having a higher value of Q, the bandwidth will
A
Increase
B
Remain the same
C
Decrease
D
Be less selective
A signal m(t) with bandwidth 500 Hz is first multiplied by a signal g(t). The resulting signal is passed through an ideal low pass filter with bandwidth 1 kHz. The output of the low pass filter would be :
A
Impulse
B
m(t)
C
0
D
m(t)del(t)
A signal m(t) with bandwidth 500 Hz is first multiplied by a signal g(t) where
$$g\left( t \right) = \sum\limits_{k = - \infty }^\infty {{{\left( { - 1} \right)}^k}\delta \left( {t - 0.5 \times {{10}^{ - 4}}k} \right)} $$
The resulting signal is then passed through an ideal low pass filter with bandwidth 1 kHz. The output of the low pass filter would be
A
δ(t)
B
m(t)
C
0
D
m(t) δ(t)
Butterworth lowpass filter has a parameter, filter order, determining its functionality as very sharp or very smooth filter function or an intermediate filter function. If the parameter value is very high, the filter approaches to which of the following filter(s)?
A
Ideal lowpass filter
B
Gaussian lowpass filter
C
All of the mentioned
D
None of the mentioned