Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

In a turbopump system using a gas generator cycle, the flame temperature in the separate gas generator where a small portion of overall propellant is burned is _________ compared to the main gas generator and its mixture ratio is _________ compared to that of the main gas generator.

Correct Answer: lower, different
The flame temperature in the smaller gas generator is lesser than the main gas generator. Its mixture ratio is different from that of the main gas generator. This factor contributes to the slight change in the overall mixture ratio of propellants flowing from the tanks.

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. and __________ a small circular flame

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. was achieved. _________ you wanted the flame

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. and __________ a small circular flame

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. would spread _________ a loud noise.

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. had to be _________ opened to reduce

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. was achieved. _________ you wanted the flame

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. below would be __________ pressure

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. would spread _________ a loud noise.

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. had to be _________ opened to reduce

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________ a small circular flame would appear in the burner. The valve had tobe opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. Tolower the flame, the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted theflame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. below would be __________ pressure