Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

The crack propagation rate with stress is given as ______ Where; -> da/dN is crack growth with each cycle -> C is constant -> σm is mean stress -> σa is alternating stress -> a is the crack length -> m and n are constant

Correct Answer: da/dN = C σam an
The crack growth with each cycle is given by the alternating stress: -> da/dN = C σam an The value of the m varies from 2 to 4, and the value of n varies from 1 to 2. So, if the alternating stress is high, the crack growth with each cycle will be more and vice versa.

S1: Different countries show different pattern of growth.
P: Many others have a high birth rate with a low death rate.
Q: Some have a high birth rate and still have a high death rate.
R: The developing countries show the most rapid growth rate.
S: Some others like the European nations, have a low birth rate and a low death rate.
S6: Compared to this in Europe the growth rate is low.

The Proper sequence should be:

Find the crack growth per cycle for a steel plate where the crack growth equation is given by: -> da/dN = A(ΔK)p The value of p=3, A= 6.9*10-18, and stress intensity factor variation is 1 kPa m1/2.

According to Irwin’s correction of plasticity at the crack tip, the sufficient crack length is given as the actual crack length plus the radius of the plastic zone. The radius of the plastic zone (rp) in case of plane stress is given as ________

The young’s modulus of the steel is 600 MPa, and the plastic stress required to extend the crack is 50*10-9, and the initial crack length is 2 microns. Find the fracture stress required to crack the material?

In balanced growth phase of a cell,
P. All components of a cell grow at the same rate.
Q. Specific growth determined by cell number or cell mass would be the same.
R. The growth rate is independent of substrate concentration.
S. The growth rate decreases with decreasing substrate concentration.

According to Irwin’s correction of plasticity at the crack tip, the effective crack length is given as the actual crack length plus the radius of the plastic zone. The radius of the plastic zone (rp) in case of plane strain is given as ________

Which of the following statements are true/false?
1. A minimum rate of wages for the time spent by employees for the production of output is minimum time rate.
2. Minimum piece rate is the rate based on the quantity of the output employees have produced.
3. The guaranteed time rate is a minimum rate of remuneration to apply in the case of employees employed on piece work for the purpose of securing to such employees a minimum rate of wages on a time work basis.
4. A minimum rate of remuneration to apply in the case of employees employed on piece work for the purpose of securing to such employees a minimum rate of wages on a time work basis is overtime rate.

According to Irwin’s theory of crack resistance, the failure occurs when the rate of change of __________ release rate is equal to the rate of change of _______________ to the crack growth.

Consider the following statements regarding ICAO recommendation for correction to basic runway length of these statements
1. The basic runway length should be increased at the rate of 7 percent per 300 m rise in elevation above the mean sea level.
2. The basic runway length after having been corrected for elevation should be further increased at the rate of 1 percent for every 1°C rise in airport reference temperature above the standard atmospheric temperature at that elevation.
3. The runway length after having been corrected for elevation and temperature should be further increased at the rate of 20% for every 1 percent of effective gradient.

In the following passage some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. The generation gap is another of those characteristic features that set Homo sapiens apart from other animals. It is ______ if ever the most intelligent of apes ever blamed its juniors for their ______ ways! Over the years people have tried to analyse it, explain it, understand it, even ignore it, but it remains, ready to ______ each generation as it tries to ______ its own ______ about life and living. ready to ______ each generation