In the figure given below A and D are fixed points, link AB rotates at a uniform angular velocity of 900 rev/min ccw, find angular velocity of BC in rad/s. Rab = 100mm, Bc = 450, distance of E from BC = 100mm, Cf= 75mm, CD = 275mm, AD =250mm, perpendicular DF = 17mm, perpendicular BE = 250mm.

In the figure given below A and D are fixed points, link AB rotates at a uniform angular velocity of 900 rev/min ccw, find angular velocity of CDin rad/s. Rab = 100mm, Bc = 450, distance of E from BC = 100mm, Cf= 75mm, CD = 275mm, AD =250mm, perpendicular DF = 17mm, perpendicular BE = 250mm.

A

48.37

B

48.77

C

49.47

D

45.37

In the figure given below A and D are fixed points, link AB rotates at a uniform angular velocity of 900 rev/min ccw, find the instantaneous velocity of point E in m/s. Rab = 100mm, Bc = 450, distance of E from BC = 100mm, Cf = 75mm, CD = 275mm, AD = 250mm, perpendicular DF = 17mm, perpendicular BE = 250mm.

A

8.3

B

8.7

C

9

D

7.6

In the figure given below A and D are fixed points, link AB rotates at a uniform angular velocity of 900 rev/min ccw, find instantaneous velocity of point F in m/s. Rab = 100mm, Bc = 450, distance of E from BC = 100mm, Cf= 75mm, CD = 275mm, AD =250mm, perpendicular DF = 17mm, perpendicular BE = 250mm.

A

8.3

B

8.7

C

9.4

D

7.6

In a single link robotic arm the end-effector slides upward along the link with a velocity of 0.5 m/s while the link rotates about revolute joint with an angular speed of 1 rad/sec. When the end-effector is at a distance of 1 m from the joint, the acceleration experienced by the end-effector will be

A

1 m/s2

B

1.41 m/s2

C

1.71 m/2

D

2 m/2

ABCD is a four bar mechanism in which AB = 310 mm and CD = 450 mm. AB and CD are both perpendicular to the fixed link AD, as shown in the below figure. If the velocity of B at this condition is v. Then the velocity of C is

A

$$\frac{1}{3}$$ v

B

$$\frac{2}{3}$$ v

C

$$\frac{3}{2}$$ v

D

$$\frac{9}{4}$$ v

The two links OA and OB are connected by a pin joint at O. If the link OA turns with angular velocity ω1 rad/s in the clockwise direction and the link OB turns with angular velocity ω2 rad/s in the anti-clockwise direction, then the rubbing velocity at the pin joint O is

A

ω1.ω2.r

B

(ω1-ω2)r

C

(ω1+ω2)r

D

(ω1-ω2)2r

The two links OA and OB are connected by a pin joint at O. If the link OA turns with angular velocity $${\omega _1}$$ rad/s in the clockwise direction and the link OB turns with angular velocity $${\omega _2}$$ rad/s in the anticlockwise direction, then the rubbing velocity at the pin joint O is (where r = Radius of the pin at O)

A

$${\omega _1}{\omega _2}{\text{r}}$$

B

$$\left( {{\omega _1} - {\omega _2}} \right){\text{r}}$$

C

$$\left( {{\omega _1} + {\omega _2}} \right){\text{r}}$$

D

$$\left( {{\omega _1} - {\omega _2}} \right)2{\text{r}}$$

The two links OA and OB are connected by a pin joint at O. If the link OA turns with angular velocity $${\omega _1}$$ rad/s in the clockwise direction and the link OB turns with angular velocity $${\omega _2}$$ rad/s in the clockwise direction, then the rubbing velocity at the pin joint O is (where r = Radius of the pin at O)

A

$${\omega _1}{\omega _2}{\text{r}}$$

B

$$\left( {{\omega _1} - {\omega _2}} \right){\text{r}}$$

C

$$\left( {{\omega _1} + {\omega _2}} \right){\text{r}}$$

D

$$\left( {{\omega _1} - {\omega _2}} \right)2{\text{r}}$$

If OC is the crank and PC is the connecting rod of a reciprocating steam engine and rotates with uniform angular velocity in clockwise direction in the given figure below: then under which condition the piston will undergo retardation?

A

N lies to the right of O

B

N lies to the left of O

C

N is above O

D

N is below O

In the below figure, PC is the connecting rod and OC is the crank making an angle θ with the line of stroke PO and rotates with uniform angular velocity at $$\omega $$ rad/s. The Klien's acceleration diagram for determining the acceleration of the piston P is shown by quadrilateral CQNO. The acceleration of the piston P with respect to the crank-pin C is given by

A

$${\omega ^2}$$ × NO

B

$${\omega ^2}$$ × CO

C

$${\omega ^2}$$ × CN

D

$${\omega ^2}$$ × QN