If a body is subjected to stresses in xy plane with stresses of 60N/mm² and 80N/mm² acting along x and y axes respectively. Also the shear stress acting is 20N/mm². Find the minimum normal stress.

If a body is subjected to stresses in xy plane with stresses of 60N/mm² and 80N/mm² acting along x and y axes respectively. Also the shear stress acting is 20N/mm²Find the maximum amount of shear stress to which the body is subjected.

A

22.4mm

B

25mm

C

26.3mm

D

27.2mm

If a body is subjected to stresses in xy plane with stresses of 60N/mm² and 80N/mm² acting along x and y axes respectively. Also the shear stress acting is 10N/mm². Find the inclination of the plane in which shear stress is maximal.

A

45’

B

30’

C

60’

D

15’

If a body is subjected to stresses in xy plane with stresses of 60N/mm² and 80N/mm² acting along x and y axes respectively. Also the shear stress acting is 20N/mm². Find the maximum normal stress.

A

90

B

92.4

C

94.2

D

96

A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The minimum normal stress will be

A

400 MPa

B

500 MPa

C

900 MPa

D

1400 MPa

Tresca or maximum-shear stress criteria assumes that yielding occurs when the maximum shear stress reaches a value of the shear stress in the uniaxial tension test. Assume the principal stress being σ1, σ2, σ3 where σ1 is largest, and σ3 is the smallest principal stresses. Find the value of minimum shear stress to cause yielding, given that yield stress in tension is equal to σo?

A

τ = σo

B

τ = σo/2

C

τ = σo/3

D

τ = σo/4

A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum shear stress will be

A

400 MPa

B

500 MPa

C

900 MPa

D

1400 MPa

Consider the following statements: X. Two-dimensional stresses applied to a thin plater in its own plane represent the plane stress condition. Y. Normal and shear stresses may occur simultaneously on a plane. Z. Under plane stress condition, the strain in the direction perpendicular to the plane is zero. Which of the above statements are correct?

A

2 only

B

1 and 2

C

2 and 3

D

1 and 3

A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be

A

400 MPa

B

500 MPa

C

900 MPa

D

1400 MPa

When a body is subjected to biaxial stress i.e. direct stresses $$\left( {{\sigma _{\text{x}}}} \right)$$ and $$\left( {{\sigma _{\text{y}}}} \right)$$ in two mutually perpendicular planes accompanied by a simple shear stress $$\left( {{\tau _{{\text{xy}}}}} \right),$$ then minimum normal stress is

A

$$\frac{{{\sigma _{\text{x}}} + {\sigma _{\text{y}}}}}{2} + \frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$

B

$$\frac{{{\sigma _{\text{x}}} + {\sigma _{\text{y}}}}}{2} - \frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$

C

$$\frac{{{\sigma _{\text{x}}} - {\sigma _{\text{y}}}}}{2} + \frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$

D

$$\frac{{{\sigma _{\text{x}}} - {\sigma _{\text{y}}}}}{2} - \frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$

A cubic shape body is subjected to stress as shown in the figure below. Both are stresses are equal in magnitude but opposite in direction. Calculate the shear stresses on black plane and green plane.

A

Black=σ, green=0

B

Black=σ, green=σ/2

C

Black=σ/2, green=σ/2

D

Black=σ, green=σ