Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

What is the source voltage applied across a loop containing a resistor of 1000 ohm and capacitor of 15 microfarads in series when a current of 0.02 ampere flows across the circuit? Given that the voltage drop across capacitor is 5 Volts?

Correct Answer: 25 Volts
Given : Voltage drop across capacitor = 5 Volts Current in loop = 0.02 ampere Resistance = 1000 ohm Capacitance=15 microfarads Drop across resistor=1000 *0.02 Drop across resistor=20 Volts Source voltage (Total Voltage) = Drop across resistor + Drop across resistor Source voltage = 10 Volts + 5 Volts Source voltage=25 Volts.

What is the source voltage applied across a loop containing a resistor of 100 ohm and capacitor of 15 microfarads in series when a current of 0.05 ampere flows across the circuit? Given that the voltage drop across capacitor is 2 Volts?

What is the source voltage applied across a loop containing a resistor of 500 ohm and capacitor of 10 microfarads in series when a current of 0.02 ampere flows across the circuit? Given that the voltage drop across capacitor is 2 Volts.

The parallel combination of a 6.8 kΩ resistor and a 10 kΩ resistor is in series with the parallel combination of a 2.2 kΩ resistor and a 1 kΩ resistor. A 100 V source is connected across the circuit. The resistor(s) with the greatest voltage drop is (are)

A suspension string have 3 units. Voltage across topmost and lower most unit of string are 6.71 volts and 11 volts respectively. What is the voltage across middle string, if voltage across whole string is 25.76 volts?

What is the current flowing through a resistor of 24 ohms if a capacitor of 10 microfarads is placed in parallel to the resistor and 4V DC voltage supply is placed in series with the resistor?

A 2-port network is driven by a source Vs = 100 V in series with 5 ohm, and terminated in a 25 ohm resistor. The impedance parameters are The Thevenin equivalent circuit presented to the 25 ohm resistor is

Two resistors are in series: a 5.6 kΩ resistor and a 4.7 kΩ resistor. The voltage drop across the 5.6 kΩ resistor is 10 V. The voltage across the 4.7 kΩ resistor is

The circuit shown below has the following parameters: V1 = 8 Volts V2 = 6 Volts Vs = 10V/√2 (rms) Voltage drop across D1 & D2 = 0.7 Volts At the load (R), the peak value in the positive half cycle will be

The circuit shown below has the following parameters: Voltage drop across D1 & D2 = 0.7 Volts V1 = 8 Volts V2 = 6 Volts Vs = 10V/√2 (RMS) At the load (R), the peak value in the negative half cycle is

What is the current flowing through a resistor of 24 ohms if a capacitor of 10 microfarads is placed in series to a resistor along with 10V DC voltage supply?